Select Page

Ultra Drain Seal Truck Mounts

drain-seal-orange Ultra Drain Seal Truck Mount

For use with Ultra-Drain Seals (not included).

Truck Mounted Container Provides Quick and Easy Access to Ultra-Drain Seals

  • Reinforcing mesh is “sandwiched” between layers of polyurethane — increases durability and resistance to tearing.
  • Unique, urethane construction allows the pad to deform and seal off most drains — temporarily “seals” to any smooth surface.
  • A valuable addition to any emergency response plan, spill kit, SPCC or stormwater management program.
  • Unlike some alternative products, BOTH sides will quickly seal drains — there is no specified “top” or “bottom.”
drain-seal-truck-mount Ultra Drain Seal Truck Mount
ULTRA-DRAIN SEAL TRUCKMOUNT
Part# 2145 Fits 18” x 18”, 24” x 24”, 12” dia. and 20” dia. Drain Seals
(458 mm x 458 mm, 610 mm x 610 mm, 305 mm dia. and 508 mm dia. Drain Seals)
Part# 2146 Fits 36” x 36” and 30” dia. Drain Seals (915 mm x 915 mm and 762 mm dia. Drain Seals)
Part# 2147 Fits 42” x 42”, 48” x 48” and 42” dia. Drain Seals
(1,067 mm x 1,067 mm, 1,220 mm x 1,220 mm and 1,067 mm dia. Drain Seals)

Chemtech International Inc. is an exclusive distributor of UltraTech International Inc., the industry-leading manufacturer of stormwater management and erosion control products. All UltraTech International Inc. products are designed to meet the New Stormwater Management Regulations of the EPA’s Clean Water Act, to help businesses maximize operational efficiency while protecting the environment.

What is stormwater?

Stormwater is rainwater or melted snow that runs off streets, lawns, and other sites, which is typically absorbed into the ground and ultimately flows into streams and rivers. Impervious surfaces such as pavement and roofs, however, prevent stormwater to naturally soak into the ground. The water instead runs rapidly into storm drains, sewer systems, and drainage ditches, which can cause a wide range of problems, including downstream flooding, stream bank erosion, sewer overflows, infrastructure damage, contaminated streams, rivers and coastal water.

Stormwater Management Products

UltraTech International Inc. offers a comprehensive line of stormwater management products to effectively prevent various types of pollutants and contaminants, including hydrocarbons, dirt and sediment, from entering waterstorm systems, storm drains, catch basins and curb inlets.

Cost-Efficient Solutions

Advanced erosion control products from UltraTech International Inc. are cost-efficient solutions to prevent erosion and minimize sediment runoff found in stormwater. All UltraTech International Inc. dewatering bags, silt dike barrier systems, and gravel bags are designed to effectively capture trapped sediment and oil and to prevent erosion and infrastructure damage.

Get a Custom Quote

Fill out the form below.


Related Articles

pexels-brixiv-6240578-2-400x250 Ultra Drain Seal Truck Mount

Cleaning and Maintaining a Storm Drain

Stormwater is an ongoing headache for facility managers. Without proper storm drain solutions, it becomes difficult to maintain regulatory compliance on-site, especially as the facility grows. Cleaning and maintaining your storm drains are crucial steps in ensuring ongoing viability.

read more
HydroKleen-and-Curb-Guard-Plus-400x250 Ultra Drain Seal Truck Mount

Stormwater Drain Best Practices

A stormwater drain is an important part of your facility, ensuring that excess water is dealt with safely and reliably. But drain protection is important, too — solutions like storm drain blockers and a range of different best practices can keep your drains working at their best.

read more
pexels-photo-2203683-400x250 Ultra Drain Seal Truck Mount

Dealing with Contaminated Soil: 4 Methods

Oil or petroleum contaminated soil needs remediation and treatment. In fact, you will need to make sure that soil is protected from all hazardous contaminants to keep your business safe, sustainable, and compliant with regulation. There are a number of methods you can choose to achieve this.

read more

Have any questions or comments?
888-709-8070