Ultra TrackPans
Ultra TrackPans
Capture Hazardous Spills From Railroad Tanker Cars and Locomotives
Ultra-TrackPans have been designed to provide spill containment at industrial rail sidings, locomotive maintenance and fueling facilities. Available in virtually any length, Ultra-TrackPans may be used to collect small spills and leaks OR to capture and channel off significant spills caused by defective equipment or a major overflow.
- Prevent Costly Cleanup and Regulatory Fines.
- Slip-Resistant Design — Entire top surface is safe to walk on, even when wet or oily.
- All Polyethylene Construction — Rugged TrackPans withstand harsh chemicals and are designed to function in temperatures ranging from -40° F to +140° F.
- Sealed System — Polyethylene gaskets keep spills from falling between the rails and Pans.
- Trucks and other vehicles can drive over TrackPans with grates in place.*
*To drive over TrackPans, firm footing must be beneath the Pans; also must “ramp up” to Side Pans with asphalt or concrete.
U.S. Patent Nos. 5,562,047; 6,173,856; Other Pat. Pending
Modular Design
Center and Side Pans are 53.5” long; containment areas can be easily assembled to any length desired.
TrackPans with Grates, No Covers
TrackPans with Grates and Covers
Optional TrackPan Covers Keep Rainwater Out Of The Pans, Providing Effective Stormwater Management
Unique stormwater feature is designed to eliminate “pooling” of rain that falls on top of the Center Pan Covers; rain is channeled onto the ballast between the tracks, stays out of the Pans.
- Low Maintenance — Unlike carbon steel track pans, TrackPans will not rust or corrode. Polyethylene resin is treated with a UV inhibitor, resists degrading effects of the sun.
- Low Cost Installation — Lightweight TrackPans can be easily installed without heavy lifting equipment, i.e., forklifts, cranes, backhoes, etc. Minimal tools and labor required.
- Slip Resistant Surfaces — Pans, grates and covers have been designed with safety in mind. All top surfaces resist slips when wet or oily.
- Long Work Life — Estimated to perform for 20–30 years; longer than fiberglass pans.
Installation is simple!
Flow-through channels — All Pans are connected “end-to-end” with bulkhead fittings, and a 3-inch diameter flow-through channel.
Closed-cell, polyethylene gaskets are then installed to provide a seal between the Pans and rails. (Black gaskets are provided.)
Side Pans are secured in place with rebar or other fasteners. (2-foot-long rebar fasteners with protective caps are available as options.)
ULTRA TRACKPANS | ||
---|---|---|
TrackPans with Grates, No Covers | TrackPan Covers Only | Options |
Part# 9566: Center TrackPan with Grates (Includes 2 bulkhead fittings, 4 gaskets, 2 grates) Dimensions: 53 1/2” x 53 1/2” x 6” • Weight: 106 lbs. Containment Capacity: 18 gallons | Part# 9580: Cover for Center TrackPan Dimensions: 56” x 54” Weight: 24 lbs | Part# 9584: Rebar Fasteners with Protective Caps 20-Pack |
Part# 9559: 3” dia. Bulkhead Fitting (for below-grade piping) | ||
Part# 9586: Sorbent Mats, Center Pan (2/set),10-Pack | ||
Part# 9576: Side TrackPan with Grate (Includes 1 bulkhead fitting, 2 gaskets, 1 grate) Dimensions: 53 1/2” x 27 1/2” x 6” • Weight: 60 lbs. Containment Capacity: 19 gallons | Part# 9581: Cover for Side TrackPan Dimensions: 56” x 27 3/4” Weight: 11 lbs | Part# 9585: Sorbent Mats, Side Pan 20-Pack |
Part# 9571: Grate Only for Center Pan (Left) Part# 9572: Grate Only for Center Pan (Right) | ||
Part# 9573: Grate Only for Side Pan |
NOTE: Ultra TrackPans can also be ordered as complete systems: Popular 9-foot, 40-foot and 60-foot systems are available.
Top Sellers
- Sediment Control Products
- Stormwater Management Products
- Spill Containment Products
Chemtech International Inc. is one of the oldest distributors of UltraTech International, Inc. secondary containment, spill prevention and response equipment. For over two decades, Chemtech has been the preferred supplier of UltraTech International, Inc. spill containment products for many domestic and international companies around the world.
Economic & Cost-effective
Spills and workplace accidents cost businesses and industries millions of dollars every year. Secondary containment and prevention products are an economic and cost-effective solution to protect your business and personnel, reducing worker exposure to hazardous materials as well as environmental penalties for spills or non-compliance orders.
Protect Personnel & Your Business
UltraTech International, Inc. secondary containment and prevention products are designed to capture hazardous material spills from a wide variety of vessels. By containing spills, you protect your personnel from potential slip and fall injuries and reduce your costs associated with worker health and safety. With our products, you can also reclaim spills to reduce ongoing disposal costs. And by preventing spills, you reduce clean-up costs, helping to maximize your operational and labor efficiencies.
Extensive Product Line
Chemtech offers an extensive product line of UltraTech International, Inc. spill decks, track pans, funnels and accessories to meet all your toxic material containment, handling, shipping, safety and emergency needs. All UltraTech International, Inc. secondary containment and prevention products are engineered to meet both local and state government regulations, including SPCC, EPA, OSHA, and DOT.
Get A Custom Quote
Fill out the form below.
Related Articles
Stay Informed with Chemtech International: Explore cutting-edge articles and breaking news in the world of chemical technology. Uncover innovations, industry insights, and advancements shaping the future of chemistry and beyond.
Have Any Questions Or Comments?
Call Us For Help!
888-709-8070