ULTRA TRACKPANS
Ultra TrackPans
Capture Hazardous Spills From Railroad Tanker Cars and Locomotives
Ultra-TrackPans have been designed to provide spill containment at industrial rail sidings, locomotive maintenance and fueling facilities. Available in virtually any length, Ultra-TrackPans may be used to collect small spills and leaks OR to capture and channel off significant spills caused by defective equipment or a major overflow.
- Prevent Costly Cleanup and Regulatory Fines.
- Slip-Resistant Design — Entire top surface is safe to walk on, even when wet or oily.
- All Polyethylene Construction — Rugged TrackPans withstand harsh chemicals and are designed to function in temperatures ranging from -40° F to +140° F.
- Sealed System — Polyethylene gaskets keep spills from falling between the rails and Pans.
- Trucks and other vehicles can drive over TrackPans with grates in place.*
*To drive over TrackPans, firm footing must be beneath the Pans; also must “ramp up” to Side Pans with asphalt or concrete.
U.S. Patent Nos. 5,562,047; 6,173,856; Other Pat. Pending
Modular Design
Center and Side Pans are 53.5” long; containment areas can be easily assembled to any length desired.
TrackPans with Grates, No Covers
TrackPans with Grates and Covers
Optional TrackPan Covers Keep Rainwater Out Of The Pans, Providing Effective Stormwater Management
Unique stormwater feature is designed to eliminate “pooling” of rain that falls on top of the Center Pan Covers; rain is channeled onto the ballast between the tracks, stays out of the Pans.
- Low Maintenance — Unlike carbon steel track pans, TrackPans will not rust or corrode. Polyethylene resin is treated with a UV inhibitor, resists degrading effects of the sun.
- Low Cost Installation — Lightweight TrackPans can be easily installed without heavy lifting equipment, i.e., forklifts, cranes, backhoes, etc. Minimal tools and labor required.
- Slip Resistant Surfaces — Pans, grates and covers have been designed with safety in mind. All top surfaces resist slips when wet or oily.
- Long Work Life — Estimated to perform for 20–30 years; longer than fiberglass pans.
Installation is simple!
Flow-through channels — All Pans are connected “end-to-end” with bulkhead fittings, and a 3-inch diameter flow-through channel.
Closed-cell, polyethylene gaskets are then installed to provide a seal between the Pans and rails. (Black gaskets are provided.)
Side Pans are secured in place with rebar or other fasteners. (2-foot-long rebar fasteners with protective caps are available as options.)
ULTRA TRACKPANS | ||
TrackPans with Grates, No Covers | TrackPan Covers Only | Options |
Part# 9566: Center TrackPan with Grates (Includes 2 bulkhead fittings, 4 gaskets, 2 grates) Dimensions: 53 1/2” x 53 1/2” x 6” • Weight: 106 lbs. Containment Capacity: 18 gallons | Part# 9580: Cover for Center TrackPan Dimensions: 56” x 54” Weight: 24 lbs | Part# 9584: Rebar Fasteners with Protective Caps 20-Pack |
Part# 9559: 3” dia. Bulkhead Fitting (for below-grade piping) | ||
Part# 9586: Sorbent Mats, Center Pan (2/set),10-Pack | ||
Part# 9576: Side TrackPan with Grate (Includes 1 bulkhead fitting, 2 gaskets, 1 grate) Dimensions: 53 1/2” x 27 1/2” x 6” • Weight: 60 lbs. Containment Capacity: 19 gallons | Part# 9581: Cover for Side TrackPan Dimensions: 56” x 27 3/4” Weight: 11 lbs | Part# 9585: Sorbent Mats, Side Pan 20-Pack |
Part# 9571: Grate Only for Center Pan (Left) Part# 9572: Grate Only for Center Pan (Right) | ||
Part# 9573: Grate Only for Side Pan |
NOTE: Ultra TrackPans can also be ordered as complete systems: Popular 9-foot, 40-foot and 60-foot systems are available.
Chemtech International Inc. is one of the oldest distributors of UltraTech International, Inc. secondary containment, spill prevention and response equipment. For over two decades, Chemtech has been the preferred supplier of UltraTech International, Inc. spill containment products for many domestic and international companies around the world.
Economic & Cost-effective
Protect Personnel & Your Business
Extensive Product Line
Get a Custom Quote
Fill out the form below.
9 Golden Rules for Handling Hazardous Materials
Hazardous materials are widely used in industry in America. It goes without saying that these materials are dangerous, and pose serious risks to the people that work with them. However, by following a few golden rules, you and your team can work to minimize risks,...
Environmental Safety and Energy Standards in Today’s Industry
Safety and environmental protection within industry remains a primary concern across the board. As the international climate continues to shift toward a more environmentally conscious set of standards, industrial operations have been placed into an amplified...