Odor Control – IND


Microbe-Lift IND is a highly active liquid culture consortium designed specifically for use in almost all environmental applications. IND select cultures promote increased biological degradation capabilities in all types of designs of biological wastewater systems, open lagoon and polluted environments. IND consortium is very effective in degrading hard degradable compounds such as fatty acids, various chemical compounds, hydrocarbons and fibrous matters that indigenous bacteria often unable to degrade them, hence result in system performance deficiency. These cultures resist shock loads of chemicals, reducing upsets and kills, which may occur in waste-water treatment systems. This translates to improved system performance, stability and reduced final effluent BOD, COD and TSS. Microbe-Lift IND will breakdown fats, oils and grease in lift stations along with reducing hydrogen sulfide and ammonia odors.


Microbe-Lift IND cultures can be used in any wastewater system to maintain and improve performance. This includes lagoons, activated sludge bio-reactors, bio-towers, and aerobic and anaerobic digesters.


With Microbe Lift’s IND Series has been mixed with highly specialized microorganisms that are designed to speed the biological degradation of problem compounds in waste water systems. The IND Series has been tested to degrade the following toxic compounds at accelerated rates; phenols, surfactants, chlorinated hydro-carbons, starches, fats, and oils.


The Microbe Lift Series IND is designed to resist inhibitory concentrations of difficult-to-degrade constituents, which improves system stability. Industrial and municipal system upsets and biomass kills are common through these wastewater systems. Read more about how a Township in Pennslyvania cleaned up their wastewater with Microbe Lift.


The Microbe Lift Series IND is perfect for industrial wastewater systems, where hydrogen sulfide is an issue. These odor-causing compounds can make working conditions for employees and living conditions residential homeowners tough. Degrades a wide range of other organic chemicals too.


There are many upsets and kills within municipal and industrial waste water systems. The Microbe Lift Series IND resists shock loads of chemicals, which keeps your system safer. By adding in the cultures, you are keeping your waste water system’s performance and stability.


The Microbe Lift Series IND cultures will help with TSS (Total Suspended Solids). These cultures can be used in lagoons, activated sludge bio-reactors, bio-towers, and aerobic digesters.


The Microbe Lift Series IND has the ability to reduce final effluent Biochemical Oxygen Demand (BOD), Chemical Oxygen Demand (COD), and Suspended Solids (SS).


Microbe Lift IND drives nitrification for improved ammonia removal and achieves rapid anoxic denitrification.
microbeorder OC-IND

Microbe Lift Odor Control

  • Controls Odor
  • Microbial humic odor abatement technology

Specially formulated for organic-based odor control

Controls odor and enhances degradation of difficult organic waste matter

MICROBE-LIFT / OC-IND is a natural organic-based technology designed to control gas generating odor reactions in wastewater systems, storage systems, lagoons, landfills and transfer stations. This novel organic technology contains reactive constituents that function as macromolecular sponges, permanently binding odor and stopping odor in its tracks. Works on contact.

MICROBE-LIFT / OC-IND works in a wide range of temperatures. Effective in pH of 5.0 to 9.5.

CAUTION: Keep out of reach of children. Do not take internally. Avoid contact with eyes. Flush immediately if needed. Use gloves and safety glasses when handling spills. If contact is made, wash with soap and water. If swallowed, drink several glasses of water. Contact physician if any irritation persists.

Bio-Available – Non-Toxic – Non Pathogenic

mloc-cropped OC-IND

To control odor and improve water and air quality, add to the inlet of the receiving system, wastewater faiclity or lagoon. Use in all odor related areas, pits, surfaces, lagoons and wastewater facilities (all processes). Add at a rate of 2 ppm – 10 ppm. The use rate is determined by the odor level. Applications may include surface spraying, particularly for solid dumpsite odor control. Mix 1 part ML/OC with 100-500 parts water, then pray generously over the surface.

Related Articles

R-C-1-400x169 OC-IND

What is polymer water treatment?

Is it a good idea to use polymers for water treatment? How does polymer water treatment work and what advantages does it offer to facility managers? Read on to learn about this in more detail and to examine how polymers can be deployed within your own wastewater treatment strategy.

read more

Have any questions or comments?